Bicycles have been around for over a hundred years and continue to be one of the most popular modes of transportation.
Not only are they great for getting around town, but they’re also an excellent form of exercise.
And with the rise in bike commuting, it’s more important than ever to know how to transport your bike properly.
One way to do that is by using a bike rack. Bike racks can be attached to the roof or rear of your vehicle, or you can use a trunk-mounted model.
But whatever type you choose, there are some basic steps you’ll need to follow to mount your bike on the rack safely.
In this article, we’ll show you how to mount womens bike on bike rack in simple steps-
Understanding the Difference Between Men’s and Women’s Bikes
The women’s bike has a much steeper sloped top tube than the men’s, starting at the handlebars and angling down toward the back wheel. On the other hand, on men’s bikes, the top tubes are horizontal.
They connect the bike to car bike racks easily.
These sloping top tubes are prevalent in many different types of bicycles. This causes the same issues you’re facing with mounting a women’s bike on the bike rack.
It’s standard on low-step-through bicycle frames and full-suspensions mountain bike frames.
The bottom line is this: With women’s bikes, you need to replace the horizontal top tube with something else, and crossbar adapters are the way to go.
Crossbar Adapters
A bicycle crossbar adapter, or a woman’s bike rack adapter, adds a top tube so that most bikes can be carried on a regular bike rack.
Any type of rack which secures a bicycle by its top tube will work with this accessory.
If you have women’s bicycles, step-through bicycles, or any other bicycle that is difficult to mount, you can attach a temporary top bar to a bike rack using this tool.
Benefits of using a crossbar adapter include:
- It’s easy to assemble.
- A spring inside the bike keeps it from falling over.
- The plastic coating of these bike racks protects them from scratches and dents.
- It is useful for any frame type, including traditional, step-through, and hybrid.
Steps to Mount a Women’s Bike on Bike Rack
1. Attach the Crossbar Adapter
Attach the crossbar adapter to the back end of the bike rack. The front end should already be attached to the bike rack.
2. Ensure the Rack is Firm
Your bike rack must not bend at all. It shouldn’t move when the vehicle moves.
It’s especially important when applying brakes, increasing the speed of the vehicle, and making sharp turns. If you detect that your bike rack is shaking, tighten the bolts.
3. Secure the Rack Arms
After securing the bike rack, check for any loose bolts or screws. A rack mount is similar to a natural hand position when riding a bicycle.
To lock it, just pull it up.
If you find that the arm locks are too loose, you may need to tighten the screws. When locking your bike to the car, pay attention to raising the arms slightly.
This ensures the bike doesn’t accidentally touch and damage the car.
4. Attach the Bicycle to the Arms of the Rack
To avoid harming your car or bike, take care when attaching your bike to the rack arms. The top part of the frame can be positioned first.
Ensure that the bike is balanced on the rack. The weight of the bike should be evenly distributed.
Also, put a rag between the bike and racks to avoid scratches or other damage to your car’s paint job.
5. Secure the Bike
Finally, fasten down the rack’s arms. If you think your bicycle needs more protection, you can lock or tie it down.
Conclusion
We hope this blog helped you understand how to mount a women’s bike on a bike rack. Women’s bikes are often hard to carry because they don’t fit into standard bike racks.
However, using a crossbar adapter can easily secure a women’s bike on bike rack.
